LECO Australia imaging posts (Page 1 of 2)

In this era of incredible plug and play technology, a Video Measuring System or reticle disc for your microscope eyepiece feels like it should be enough to begin accurately measuring metallographic samples, but if you skip your calibration steps, your results could be wildly inaccurate.

When magnification was as simple as one eyepiece and one objective, finding your total magnification was as easy as multiplying the two values together. The addition of film brought a third value to the equation, but the result remained a static, concrete number.

And then along came the computer.

With a huge variety of video camera chips and monitor sizes and camera couplers and screen resolution, suddenly viewing something at 500X magnification became much more challenging. There was no way to take into account all of the permutations possible. For example, even if two systems were otherwise exactly the same, but one had a 23" monitor and the other had a 24" monitor, the magnification would be different.

It was time to replace the magnification focus with a different way of looking at things: the Field of View (F.O.V.)